Accessories

P A T E N T E D  B L A D E S   

WITH SIMILAR CONSTRUCTION TO YOUR STANDARD HIGH QUALITY 10” TILE BLADE.  REVOLUTION XT BLADES DELIVER AT LEAST THE SAME LIFE SPAN AT THE SAME PRICE.  THE DIFFERENCE IS, OUR BLADES HAVE NO CENTER AND ARE DRIVEN FROM THE OUTSIDE DELIVERING SEVERAL ADVANTAGES:

·        A) The ability to make STRAIGHT or CURVE cuts.

·        B) Easily cut a slice off the edge of your material.  The blade remains stable and rigid without wandering.

·        C) The ability to have diamond coating on the front and  back (With double sided blade) making FORWARD as well as   BACKWARD cutting possible.

·        D) Use the same blade for all materials.  There is no need to change blades.

·        E) Material will never glaze over, so there is no need to ever dress the blade.

è    Standard Blade – Scintered diamond blade included with saw.

STRAIGHT cutting as well as forward CURVE cuts in all materials

è    Double Sided Blade – Scintered diamond front and back.  STRAIGHT cutting as well as tight CURVE cuts in all materials,

    FORWARD and BACKWARD.  Radius capability of this blade is 3/8

è    Fine Grit Blade - Similar to the standard revolution blade with fine grit diamond, perfect for cutting any type of glass with little or no chipping from 1/4" thick to 2" thick.

è    Double Sided Glass Blade - Similar to the double sided revolution blades with fine grit diamond, perfect for cutting any type of glass FORWARD and BACKWARD with little or no chipping from 1/4" thick to 2" thick.

 

A C C E S S O R I E S 

è    Carriage – This high quality tool makes precision cutting possible.  With a Velcro top, the carriage accessories can be placed exactly where they are needed.  All shapes are possible, allowing the user to make perfectly straight cuts, and even slice off as little as 1/8” without blade wander.  The carriage kit comes complete with:

·        Two  45 degree Angles

·        Two  30 degree-60 degree Angles

·        Two  5 foot Rails (24” diagonal capacity)

·        1 Fence Stop

·        45 Degree Two Way Edger  (stainless steel construction.  Gives the user the ability to cut 45 degree edges, sharp or blunt.

·        Stand – Specially made for the Revolution XT to provide proper  work height and easy set up.