The perfect saw for cutting stained glass, dichroic, rippled, fused and slab glass. Also tile and stone
CUTS IN ALL DIRECTIONS. Cuts all shapes with precision, including inside and outside curves.

GRINDS AS IT CUTS. Leaves a smooth edge. No further grinding, saves you time.

BLADES LAST MUCH LONGER. Saves money.

INCLUDES EVERYTHING THAT YOU WANT IN THE PERFECT SAW.
• Fewer and longer lasting parts – extended life and minimal maintenance.
• Built-in bright white light – clear view of what you are cutting.
• Large work surface - makes working with larger pieces easy.
• Portable – the entire part of the saw snaps out of the water bath it can be used as a
• Portable Hand Saw, making it easy to clean.
• An informative and entertaining DVD showing you how to cut, perform general maintenance and how to use the accessories that are available.
• Three-year warranty and exceptional customer service.

Accessory Kit – Contains tools for cutting 30/45/60 degree angles, bevel edger-for making perfect boxes, straight edge and circle-maker.

Blades
o Standard Blade,
o Separating Blade,
o Mega Blade,
o Slim Blade,
o Slicer Blade.
o Dichroic Blade.

Super Slicer – Slices pattern bars, canes, rods, milliflore, streamers and stone. Holds pattern bars and other small items for slicing for perfectly parallel thin cuts.
THE TAURUS 3 RING SAW WILL HELP SAVE YOU TIME AND MONEY WHILE OPENING UP NEW WORLDS OF CREATIVITY.

EASILY CREATE INTRICATE CURVES, DESIGNS AND SHAPES IN GLASS TILE, STONE AND PLASTIC WITH OUT PATENTED DIAMOND-COATED BLADES.

DISCOVER THE DIFFERENCE!
* LONG LASTING PARTS! * QUIET! * BUILT IN LIGHT!
* BUILT IN FACE SHIELD! * CONVERTS TO HAND-HELD SAW

Specifications: 1/5 horsepower 110 volt 50-60 Hz
220 volt 50-60 Hz
Transformer installed with European Power Cord
Weight: 15 pounds
Warranty: 3 years

For more information on the Taurus 3 Ring Saw – Contact Us!
Stocking Distributor for Gemini Saw Company
B & P Enterprises (208) 362-3041

TAURUS 3 TIPS – From the President of Gemini Saws
You can use coolant with the Taurus 3 and it will help cutting and will not harm any of the materials in the saw. We find however that many persons can sit for hours cutting on saws as time passes quickly while doing so. Prolonged exposure to air born cutting fluid means be sure to choose a safe one. You do not have to use coolant with your saw, water works just fine. A teaspoon of vinegar will help where hard water is prevalent. A couple of drops (two!) of dish
washing liquid to your saw's water and running it is a great way to clean it, but be prepared for lots of suds and rinse it thoroughly! In the past we have suggested using ice while cutting as this speeds up the cut! Everyone then thought that you had to use ice with it or not at all and we never meant for this understanding to occur. What works better is the ice packs you get for coolers as it does not move around and make contact with the belt. Keep in mind that to the saw lukewarm water is cold so for those of you in cold studios go ahead and use warm, (not hot), water your hands will love you.

*Use all blades with eye protection. If you life the eye shield up for more clarity then be sure to wear safety goggles or at lease glasses of some type.

*Newer Taurus 3 saws come with a stabilizer which we highly suggest you put on as this greatly cuts down on grommet wear and also adds stability to the blade increasing your accuracy. Use it in the highest position as it will not interfere with visibility. If you lost it and don't have one you can order it. Stabilizer Foot - (Part# 1034)

*We have made an improvement on Taurus 3's with part numbers starting with 81000 and above. We always try to make any improvements available to all previous saw owners and this is no exception. The change is in the blue pulleys #1 and #5 in your service manuals. We found that by increasing the flange size of these wheels the drive belt is trapped and can't come off the pulley. What this does which we never knew before is that it traps the blade so that it cannot wander causing a new level of cutting stability and much longer grommet life. Add the stabilizer and you have made your saw a tour de force. If you have an older Taurus and want the two new blue pulleys, order part# 1067.

Thank you for choosing Gemini Saw Company, Inc. and allowing us the pleasure of helping to unleash your imaginations.

Jesse Cogswell
President

More information about Taurus 3

More Accessories for the Taurus 3