ACCESSORY KITThis
kit is equipped with helpful tools for completing any
project, from cutting
straight lines to perfect circles and precise angles. This
kit can be purchased
at your local stained glass supplier. As an added bonus the
Taurus 3 Accessory Kit comes with the new Taurus 3
DVD"Everything You Wanted To Know, But Were Afraid To
Ask." |
 |
|
The Straight Edge
This tool gives the ability to cut straight lines,
which would ordinarily be very difficult, with your
ring saw. Fits anywhere on the saw's work surface. |
 |
|
30/60 Degree Cutoff Triangle
Works in unison with the straight edge to cut a
30 or 60 degree angle. |
 |
|
45 Degree Cutoff Triangle
Works in unison with the straight edge to cut a 45
degree angle. |
 |
|
Bevel Edge Maker
This works in unison with the straight edge to make
perfect 45 degree beveled edges. |
 |
|
|
Circle Maker This item works on any location of
the work surface and helps to create perfect
circles. |
 |
|
Lamp Wedge
Use the lamp wedge to put a 30 degree bevel on the
edge of a finished piece. This will allow the pieces
to fit together more tightly, allowing for a
smaller, stronger solder joint. |
 |
|
|
SUPER SLICER
The Super Slicer is a device that gives you the
ability to make repetitive, perfectly parallel,
ultra thin cuts in any material that will clear the
throat height of the saw, which is 1 1/2" on the
Taurus 3 and 1" on the Taurus II.2. The Super Slicer
can be adapted for use on other saws such as band
saws as long as the blade will pass through the
ribs. |
 |
Examples
where the Super Slicer
can be useful are when cutting:
- Pattern Bars
- Streamers
- Milfiori
Virtually any other material that requires
repetitive cutting. The Super Slicer has the ability
to cut slices as thin as 1/16". |
|
Ram
Material is attached to this piece in order to be
perfectly sliced. |
 |
|
Base
Attaches to the work surface to provide a runway for
the Ram. Also provided
with the base are two removable pins that, when
removed, the base can be
used on any work surface without a grid. |
 |
|
|
Double Sided Tape Strips Used to attach material
to the Ram. |
 |
|
Rubber
Bands
Color coded for size and can also be used in
addition to the Double Sided
Tape Strips to attach material to the Ram for added
stability. |
 |
|
|
|
| Taurus 3 Ring Saw made even better! |
|
STABILIZER FOOT
The new Taurus 3 Ring Saw Blade Stabilizer reduces
grommet wear dramatically. It also gives you more
control and stability when cutting thicker material.
The Stabilizer Foot adjusts easily to accommodate
different thickness material. Perfect when using
any of the Taurus 3 blades. This spectacular
improvement will be included in all Taurus 3 Ring
Saws starting in June 2005 at no additional cost.
The Stabilizer will fit all previously purchased
Taurus 3 Ring Saws without any modifications and
will be available at your favorite supplier at a
nominal cost.
Gemini Saw Company continues to
add value to the Taurus 3 Ring Saw with yet another
improvement to the best saw for cutting all types of
materials. |
 |
|
